How to use the Vibe Board S1 stylus.
PLEASE NOTE: You may need to charge your Stylus before first use.
Q: Stylus buttons instructions
Q: How to pair the stylus
Q: How to charge the stylus
Stylus buttons instructions
1. Page Up Button:
Press this button to go back to the previous page in the Canvas app, or scroll up any webpage while you're browsing.
2. Page Down Button:
Press this button to advance to the next page in the Canvas app, or scroll down any webpage while you're browsing.
3. Eraser Switch Button:
Press this button once to switch between the Pen and Eraser in the Canvas app.
How to pair the stylus
P.S. If you use a version before 1.2.0, please follow the old steps .
1. Make sure the Bluetooth of your Vibe Board is turned on.
2. Click on any button on the stylus to initiate pairing.
3. Click "Pair" on the notification to complete.
How to charge the stylus
1. When the battery is low, the red light flashes 3 times when any key is pressed.
2. Find the USB-C charging port at the top of the stylus beneath the rubber top.
3. We suggest using a USB-A to USB-C cable to charge the stylus. The power source could be a laptop or a power outlet. When charging, the red light stays on.
P.S. If you only have a USB-C to USB-C cable, you will need to connect from "1.USB-C" or "3.DEBUG" port on the Vibe board to your stylus.
The charging port on the stylus does not support Type-C fast charging protocol. For example, you may not be able to charge the stylus using a USB-C to USB-C cable connected to a MacBook.
4. Once fully charged, the red light turns off.
5. Additionally, the indicator light turns off when the charging connection is disconnected in the middle of the charging.
Magnetic Stylus
The stylus is magnetic, you could stick it to any edge of the Vibe board.
