How to change the power saving settings

Does your Vibe board continuously turn off? Change the power saving settings here.

Sleep mode can be changed following these steps below:

  1. Go to Settings - Power Saving.
    210707_power_saving_1
  2. You will see a switch to enable or disable auto 'Power Off Device', which is on as a default. Switch it off if you want your Vibe board to be on at all times.
    210707_power_saving_2
  3. There, you can also adjust sleep settings and set how much time of inactivity should pass before going into a standby state automatically to save power. 

    210707_power_saving_3